Inspection Checklist For The Installation Of Chilled Water Piping System CHWP
INSPECTION POINT
| Contractor |
Sub-Contractor |
REMARKS | |||
Site Eng | QC | |||||
1 | Inspection is as per the approved Shop Drawings. |
|
|
|
| |
2 | Materials used are as per approved Material Submittal |
|
|
|
| |
3 | Space of supports are as per the specifications, approved shop drawing |
|
|
|
| |
4 | Additional supports provided in every change of direction |
|
|
|
| |
5 | Sleeves are provided wherever pipes crosses walls and slabs |
|
|
|
| |
6 | Coordination with other trades is taken cared of avoiding unnecessary clashes |
|
|
|
| |
7 | Rubber inserts in between pipes and clamps are used. |
|
|
|
| |
8 | Threaded rods used as supports have correct sizes, cut ends galvanize painted and cut with sufficient lentgth |
|
|
|
| |
10 | Supports used are independent form other trades, no sharing of supports |
|
|
|
| |
11 | Approved Labeling materials are provided |
|
|
|
| |
|
|
|
|
|
| |
COMMENTS: | ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| SUB-CONTRACTOR | ENGINEERS | Contractor | |
SITE ENGINEER | QUALITY ENGINEER | |||
Name: |
|
|
|
|
Signature: |
|
|
|
|
